3D Dental Scanners - Comparation

Discussion in '3D Scanners' started by JupiPupi, Jan 2, 2019.

  1. JupiPupi

    JupiPupi New Member

    I'm in process of buying my first scanner so I have made EXCEL table with some recent and popular 3D scanners on the market.
    It contains information that I think are important to watch when buying one.
    Feel free to update document with information that is missing, as You will see there are some question marks left. Just be sure that its 100% correct.
    I'm planning to add more scanners in future, but You can add them two so that we have database of all scanners on one place.

    Last edited: Jan 2, 2019
  2. harmonylab

    harmonylab Active Member

    nice table. thanks.
    JupiPupi likes this.
  3. cadfan

    cadfan Moderator Staff Member

    Forget your microns or add to which iso 12836 or VDI 2634 they are related so i see just bullshit numbers not comparable. And micron idiots belive you , and better make tests and show the results !!!
  4. BContreras

    BContreras New Member

    Have you checked out the Click? I’ve seen it live, very interesting!

  5. Sir Morty

    Sir Morty Active Member

    Anyone have success with impression scanning?
  6. BContreras

    BContreras New Member

    I’ve seen good results from impression scans, though it might depend on the case.
    Could depend on the scanner you’re using too, some cases it might be hard to get some undercuts (if you aren’t able to just trim the impression) within the angle limitations of certain desktop scanners.
    Also I’ve used an intraoral scanner with impressions and recieved great results, though not every scanner will be totally reliable for this. The intraoral scanner I’m using right now has been excellent at it, even scanning dentures!
  7. biodentg

    biodentg Well-Known Member

  8. Sir Morty

    Sir Morty Active Member

    Yeah I have tried a few and it does work on some cases like you say.
    I just feel, it's a stop gap until all practices adopt oral scanners.

    Not saying oral scanners are the answer because I have seen my fair share of inaccurate scans.
  9. JupiPupi

    JupiPupi New Member

    Your welcome!

    ISO specification; Certifications column is already there. Send me all scanners i will make detailed comparation.

    Last edited: Apr 17, 2019
  10. biodentg

    biodentg Well-Known Member

    MSRP :)
  11. BContreras

    BContreras New Member

    Well I don’t know what oral scanner you’ve used, certainly there’s a couple out there that aren’t very accurate.
    I’ve been using the Medit i500 and it’s really been fantastic so far, even with impressions!
  12. Sir Morty

    Sir Morty Active Member

    I don't have a oral scanner.

    I just work with the scans that are sent.
    Trios, Plan Scan and Itero are what I have experience with.

    There are a bunch of challenges when it comes to scanning in the mouth. Tissue management/ cord packing.

    It's optical so it picks up on everything it sees. It can be tough to see the margin on subgingival cases. Or saliva shows up and it creates inaccurate scans.

    That scan data is sent and the patient is already gone.

    It would be beneficial like in that video for it to be more real-time. But I know that sometimes it's not even the Dr. scanning. The have left that for the assistant and don't even look at the scans being sent. Or the scans are sent at the end of the day and the patient is long gone.

    You call to say you need a new scan
    And you get the dreaded, " Just do the best you can"

    I got to play with the Medit I 500 and its really nice but I was scanning a model, not real teeth. It was cool but scanning models when you can manipulate to anyway you want is easy.

    So do you scan impressions and design and print the models?
    Is that your workfow for these cases?

    Or are you still pouring models after you scan the impression to confirm the design?

    I'm totally interested in eliminating the need to sling plaster.
  13. BContreras

    BContreras New Member

    I’m a dentist so I don’t do the design but there's a tight relationship between us and the lab. I mostly scan the patient directly, and you’re right saliva and tissue can get in the way and also deep preps are an issue sometimes, but there’s been cases in which I scanned the impression and send it out.

    I’ve used a couple box scanners and honestly I really like the Click, you can just clip on your impression, triple tray, denture, etc. And it quickly gets you a really good scan! I would recommend taking a look at it.
  14. Sir Morty

    Sir Morty Active Member

    I might take you up on that offer.
    So you have a Medit I 500 and the Click scanner?

    Did you buy the click first and then just said well I should scan orally so you bought the medit?
  15. BContreras

    BContreras New Member

    I use the Medit i500 all the time. I'm a dentist from Dominican Republic
  16. Sir Morty

    Sir Morty Active Member

    Free scanner? Lab credit?
    I can't understand how that's feasible.

    I'm already dealing with competitors giving cash back to accounts.

    Whats next?
    Kongo-Otto and smithnovel like this.
  17. BContreras

    BContreras New Member

    Lol it’s quite possible actually.
    TRusso likes this.
  18. smithnovel

    smithnovel New Member

    If you have bought that's fine but if you are still looking to buy then I suggest you review several 3D scanner products before buying it. Few blogs provide you Authentic information about 3D printing.
  19. cadfan

    cadfan Moderator Staff Member

    just some interresting ios numbers reference scan GOM Atos scanner vergleich ios.jpg
    Vasyl and 2thm8kr like this.
  20. TRusso

    TRusso New Member

    Which scanner did you end up purchasing ?
    Thanks for that info btw!

Share This Page