3D systems ProJet 3000HD +

Discussion in 'For Sale' started by Affinity, Jun 12, 2017.

  1. Affinity

    Affinity Active Member Staff Member

    I am selling my projet 3000hd+, I have decided to go in another direction. The printer works and has a new rev B printhead, 3dsystems oven and several boxes of material. PM me an offer or I am willing to accept a trade for other dental gear, especially a scanner.
     
  2. DMC

    DMC Scott Hudson

    Like what scanner?

    You want a Steinbichler for Bars?

    I have maybe Eight or more 3d printers around here already.

    Then Five more in parts on the shelf.

    I am getting burnt-out on repairing them the past decade.
     
    cadfan likes this.
  3. Affinity

    Affinity Active Member Staff Member

    sure, if it came with exocad
     
  4. Affinity

    Affinity Active Member Staff Member

    bump.. anyone interested in this? Make an offer!
     
  5. DMC

    DMC Scott Hudson

    $5000usd
     
  6. Affinity

    Affinity Active Member Staff Member

    Thanks, I wish I wouldve paid that for it or I would.
     
  7. Affinity

    Affinity Active Member Staff Member

    Maybe we could trade for a millbox license? I would consider that if you have one laying around.. PM me
     
  8. DMC

    DMC Scott Hudson

    Starting bid @ $2500....anyone?
    https://www.ebay.com/itm/3D-Systems...621137&hash=item284c1a9a40:g:BmIAAOSwUYNaS~bo

    This One for sale long time! Asking $6000 but nobody buy it yet.
    https://www.ebay.com/itm/3D-Systems...761941?hash=item2eee8dbcd5:g:syQAAOSwiYFXIiFy

    Same thing....$7500 but nobody buy it for that much.
    https://www.ebay.com/itm/3D-systems...989045?hash=item4b33588f35:g:sK8AAOSw301aUYlk

    Maybe my offer of $5000 is too much? lol :wacky:

    I bought a 3510 with really low hours for less than $8000 in December.
    Machine was 1.5yrs old! Original cost was $100,000
    I convert to CPX Jewelry machine and sell for $25,000
     
  9. Affinity

    Affinity Active Member Staff Member

    I appreciate the offer, like I said maybe a trade is worth more to me. Dont necessarily need cash.
     
  10. Emildd

    Emildd New Member

    @DMC
    How much cost to convert projet 3510hdmax to cpx jeweley machine?
     
  11. DMC

    DMC Scott Hudson

    I can do it here at my facility

    For you probably cheaper to sell yours and buy a used CPX.
     
    cadfan likes this.
  12. Emildd

    Emildd New Member

    I am in Europe and i need to upgrade rhis one because is altmost new with 1000 hours and is unused. Please help me with price maybe can remotely help me to upgrade. I can pay for the service
     
  13. Emildd

    Emildd New Member

    @DMC do you know if is possible to ise a 2500 head for this with 1200x1200 reaolution???
     
  14. DMC

    DMC Scott Hudson

    Impossible for that to use 2500 head.
     
  15. DMC

    DMC Scott Hudson

    Well, We can try by remote

    I would suggest to use One bottle Visi-Flush (I have some here or get on eBay)

    Then, we empty printhead and change to Wax

    Then we change software to make your printer a CPX.
     
  16. Emildd

    Emildd New Member

    Will work for sure and without problems? How much cost the printhead to work with wax? Or no need to change printhead?
     
    Last edited: Dec 30, 2019
  17. DMC

    DMC Scott Hudson

    Change some files in your printer HDD

    reboot and it is a CPX

    Purge all material and install CPX wax

    I would purge material using Visi-Flush (I have some here or find on ebay), then purge until air comes out, then switch to CPX wax.

    CPX wax is expensive and some Chinese company makes a replacement.

    I can show you how to change files very fast and easy.

    scott (at) dominionmillingcenter d0t c0m
     
  18. Emildd

    Emildd New Member

    Thank you sir
     
  19. Emildd

    Emildd New Member

    @DMC sent you email. Thank you
     
  20. Affinity

    Affinity Active Member Staff Member

    Wheres the best place to buy projet resin? Any 3rd party?
     

Share This Page