Bulgy ancisal ledge

Discussion in 'exocad' started by Leyla, Aug 2, 2019.

  1. Leyla

    Leyla Member

    56293120-CF42-452C-8A20-A755EBB8D8FC.jpeg 56293120-CF42-452C-8A20-A755EBB8D8FC.jpeg Hey guys, i have a problem with designing a core for anterior teeth, because i have always a bulgy in Ancisal ledge, i tried not to do cement gap in ancisal ledge but i have not solved, i hop i could have express my problem. I will attach a photo and mark the area which i mean.
     
  2. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    What is the minimum thickness setting for the material?
     
  3. Leyla

    Leyla Member

  4. Vasyl

    Vasyl Well-Known Member

    I think I need a screen from the program settings. As well as a cut-view
     
  5. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    Set it lower and see how your designs look. exocad enforces minimum thickness setting.
     
  6. Vasyl

    Vasyl Well-Known Member

    And further "anticipate milling" - ??
     
  7. Leyla

    Leyla Member

    I will make tomorrow, to get the beat advice to get rid of this disaster
     
  8. Leyla

    Leyla Member

    1.4
     
  9. Leyla

    Leyla Member

    Bu
    but why the minimum thicknesses appears like this!!!! I think i should change the sitting for zirconia but i dont know how?
     
  10. Vasyl

    Vasyl Well-Known Member

  11. Vasyl

    Vasyl Well-Known Member

    But there is a question - what is the diameter of the finish mill?
     
    2thm8kr likes this.
  12. Leyla

    Leyla Member

    So it means, by reducing this value i should chose cement gap more, if eles by the previous cement gap my crowns will be so active. Is it true?
     
  13. Vasyl

    Vasyl Well-Known Member

    Sorry, I do not understand ..
    These settings are related to the diameter of the tool, and not to the gap. But they can give the effect as in the picture.
     
    Leyla likes this.
  14. Leyla

    Leyla Member

    Hey guy, thank you for your advice i did it and reduced anticipate milling and the problem has been solved!! ❤️
     
    Vasyl and 2thm8kr like this.

Share This Page