Discussion in 'exocad' started by Leandro Langue, Dec 21, 2017.
Does anyone have an STL file from Sirona CEREC?
That's a closed system. Sirona won't give out the STL or implant library to use in exocad.
Yeah! But I would like to create a library like to sirona on exocad.
If you send parts and a description of what you want they will generate a library do you can enjoy the full power of exocad
Never say you can’t- only they don’t make it easy to .....
What kind of .stl file do you need?
how do you create a library?
You need stl files of teeth and the adjunct exocad software known as Model Editor to prepare the stl files for use in exocad. That software is posted here on 3d site in several places.
i need a scan body stl file. Tks
Need a scanpost for Sirona Omnicam..
Helo, you need to have the cerec library and probably i can help you
No one (
I draw myself.
Which design is better?
I prefer the one on the left. Closed mesh.
Thank you very much!
Any questions on geometry.
!! Only geometry, without coordinates !!
Cant i have the STL?
The model is made through reverse engineering. It is not bad aligning, but asymmetric and incorrect.
Then made a parametric model. It is more correct, but worse aligning.
Hard to describe. More details on the site
How correctly - I do not know. Maybe there are tips?
!!! In the link above scan and both models.
Cut the middle part as well
Maybe you're right )
I also thought about it. Keep it simple. As a temporary stage.
Here is an example scanbody_split
IMHO, I need 7-10 normal scans. Then do the averaged parameters.
The doctor is on vacation. I also do not hurry)
Separate names with a comma.