CNC 25 full-mouth same time!

Discussion in 'CNC Machines' started by DMC, Apr 20, 2018.

  1. DMC

    DMC Scott Hudson

    OK, I am getting closer to finding my next mill.

    - 20k rpm min.....I really want 40k

    - 5-axis continuous fast controller

    - 450 x 450 x 450mm workspace without collision

    5 x 5 fixture of 98mm disks. Or actually horseshoe shape. (Dentures or full arch stuff)

    This is as close as I can find for new machine to meet my specs and not be too expensive.

    The Japanese will change Spindle to 46,000rpm

    Weight is over 12,000lbs

    Maybe close to 15k?

    Cost is over $300,000usd

    http://www.yamazen.com/products/matsuura/matsuura-mx-520/



    HAAS comes close with their UMC 750 , but Spindle is too slow and too strong.

    Not correct machine.

    Same with many others.
     
  2. DMC

    DMC Scott Hudson

    Maybe the MX-850 with custom spindle?



    .
     
  3. cadfan

    cadfan Moderator Staff Member

    nice mills i think Medentika runs them too but denture milling on this is waisted time and money to expense cost per hour is min 60 Dollar either 5 cheap mills for 35 bucks with 1 kw sycotec spindel or printed
     
  4. DMC

    DMC Scott Hudson

    No
    I need all 25 on same fixture to pack denture base and cure together.
    Then back into machine.

    Of course I realize there are cheaper mills but work space is too small.
     
  5. Chris Silvoy

    Chris Silvoy Well-Known Member

    Watch and learn peeps....great technical overview of how Scotty will do this and why he wants to do it....
     
  6. cadfan

    cadfan Moderator Staff Member

    the general problem with each big mill is time it makes no sense to mill for example zircon in a 300 bucks mill for 300 bucks you get 7-8 mills with loader and their output is higher milling pmma in the sample you save time because of no versus less tool change but therfore you always have to load the whole mill and thats unrealistic with individual products 24/7 . or you make it via loader but time advantage is more less than.
     
  7. DMC

    DMC Scott Hudson

    I want 10,000mm/min feed cutting plastics.
    I never see a small machine go more than 2000mm/min

    No reason to go slow with coolant and high speed spindle.
     
  8. cadfan

    cadfan Moderator Staff Member

    so you run 10 000 with 0.6 tool ??
     

Share This Page