EXOCAD / Dental-DB/ DOF Performance Problems

Discussion in 'exocad' started by ORKHAN RAHIMLI, Nov 3, 2019.

  1. ORKHAN RAHIMLI

    ORKHAN RAHIMLI New Member

    Hello there. I need your help. I gathered the system for Exocad
    exocad program was running weak on old( old system) computer.
    so I've collected a new system.
    My new system.It does not work well
    my old system work well. I don't know what the problem is
    Although my new system is powerful. is running bad from my old computer
    Will you help me with this problem ?. Thank you for helping

    Program version: Exocad DentalDB 2.3 matera






    new system:
    CPU:Intel Core i9-9900K Desktop Processor 8/core 16/tread 5.0 GHz
    GPU:MSI GAMING GeForce RTX 2070 8GB GDRR6 256-bit
    MBU:MSI MAG z390-plus
    RAM:Corsair Vengeance LPX 32GB (4 X 8GB) DDR4 3000
    PSU:Corsair CX Series 650 Watt 80 Plus Bronze Certified Modular Power Supply (CP-9020103-NA)
    HDD:Seagete 2TB PC Hard Drive - 7200 RPM Class D : Disk
    SSD:WD Blue 500GB m.2ssd 1700mb/s C : D upload_2019-11-3_17-23-3.gif isk
    COOLER:COOLer master Captain 240L RGB V2, AIO Liquid CPU Cooler, Anti-Leak Technology
    CASE:Thermaltake
    OS:Windows 10 x64


    old system:

    CPU:Intel Core i5-9600K
    GPU:MSI GAMING GeForce GTX 1060 6GB GDRR6 256-bit
    MBU:ASUS TUF z370
    RAM:Corsair Vengeance LPX 16GB (2 X 8GB) DDR4 3000
    PSU:Thermaltake 600 Watt 80 Plus Bronze Certified Modular Power Supply (CP-9020103-NA)
    HDD:Seagete 2TB PC Hard Drive - 7200 RPM Class D : Disk
    SSD:WD Blue 500GB m.2ssd 1700mb/s C : D upload_2019-11-3_17-23-3.gif isk
    COOLER upload_2019-11-3_17-23-3.gif EEPCOOl Air.
    CASE:Thermaltake
    OS:Windows 10 x64
     

    Attached Files:

  2. Roberto78

    Roberto78 New Member

    Hello Orkhan
    I don't see the attached file, the requirements of the new computer are excellent
     
  3. Vasyl

    Vasyl Well-Known Member

Share This Page