Gothic Arch Tracer

Discussion in 'exocad' started by 2thm8kr, Oct 1, 2019.

  1. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    Anyone experimenting with anything like this? Custom Gothic Arch Tracer.png

    Custom Gothic Arch Tracer2.png
    Rigant and cadfan like this.
  2. cadfan

    cadfan Moderator Staff Member

    in the 20 th century yes but not each doc could handle it so more than 50 % shit we made them but used the normal bites for our work , a lot big parts not each tongue likes it.
    2thm8kr likes this.
  3. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    Pt wants to know if it is possible to do single arch restoration. I made this to get CR bite from doctor before doing the DX work up. We'll see how it works??
    Planning on using it in the denture module soon.
    Vasyl and cadfan like this.
  4. AGV

    AGV Member

    I thought the same one month ago. All-on-6/4 bites are dificult, and delay work week after week in order to find the "right" one. I designed this, but need to redesign and teach the Drs. how to handle.

    Attached Files:

    cadfan, Rigant and 2thm8kr like this.
  5. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    Here is one I tried on a full mouth implant case last year.
    Trying to find a way to capture everything to scan in the least amount of steps.



    Printed immediate denture scan used for CT scan appliance, facebow record, and milled to hold prototype gothic arch tracer.



    Worked great. Very minimal adjustments to the PMMA temp. Everything has been referenced back to this mounting.
    Kongo-Otto and Vasyl like this.
  6. Frankpsikiatra

    Frankpsikiatra New Member

    Ooh!! Can share this stl of gotic arch??

    Enviado desde mi iPhone utilizando Tapatalk
  7. AGV

    AGV Member

    You're da man!. I've seen your posts in DLN about this technique. Join CT appliance, facebow and arc tracer is brilliant. Hope in the future you'll have some time for me to explain it step by step.
    Kongo-Otto and Rigant like this.
  8. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    Tracer was made in exocad using Bite Splint module using ATT tool and free form merged restoration in expert mode.
    Talking with someone at exo soon about adding this.
  9. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    I had planned on making a post here about it when I have some extra time. Hopefully soon.
    AGV, Kongo-Otto, Vasyl and 1 other person like this.

Share This Page