Help: Cercon brain expert

Discussion in 'CNC Machines' started by micky, Feb 27, 2017.

  1. micky

    micky New Member

    è possibile installare una camma aperta softwere, su un cervello EXPERT fresatrice?
     
  2. bigbrush

    bigbrush Well-Known Member

    DS-Cam by Dental Softworks ;)
     
    French Cadman likes this.
  3. Kapor 123

    Kapor 123 Member

    Hello If I install this software It will be open about consumable material? Thank
     
  4. bigbrush

    bigbrush Well-Known Member

    DS-Cam is anopen solution, for more details you better contact Dental-Softworks.com

    They will help you. As far as I knewby installing a 98mm puckholder you can use all materials. The machine is a good, very solid one.
    good luck!
     
  5. Kapor 123

    Kapor 123 Member

    Hello, I conctacted DentalSoftwork but they said me that is unpossible update their soft to the machine.
     
  6. bigbrush

    bigbrush Well-Known Member

    Oh, their software was sold for using with the cercon expert by Degussa / Dentsply 4 years ago on IDS.
    The software isn´t the problem, you need the postprocessor to create the nc-file to your machine.
     
  7. Kapor 123

    Kapor 123 Member

    How Can I get this?
     
  8. bigbrush

    bigbrush Well-Known Member

    Normally DS will sell it by buying their software.
    In your case i would try to contact my cercon dealer, or find another who use this combi in 3d forum or dnl-network
     
  9. Kapor 123

    Kapor 123 Member

    I dont know image how I can do it. What is postprocessor? Do you have Cercon and you work with 98mm?
     
  10. bigbrush

    bigbrush Well-Known Member

    No, I have 2 vhf 5-axis. A friend of mine has a cercen expert. if i reach him i can ask if he is doing the cam by DS.
    The postprocessor does the code for running the machine with the path.
     

Share This Page