Implant editor - need help

Discussion in 'exocad' started by Rune, Jan 31, 2016.

  1. Rune

    Rune The force is strong

    Hi all! + @Till
    I need help. Trying to make custom implant library. Done this before with great success, but now it won't work.
    Followed the manual, checked euler on mesh.
    Stuck.
    Normally the select implant window looks like this:
    normalwindow.jpg

    Now i get this pink shit:
    pinkwindow.jpg

    Ofcourse i cant reference the pink to a scanbody:mad:
    I think the problem is connected to the referencepoint in the xml file?

    Any ideas?

    https://www.dropbox.com/s/8mdhdljlwn9xwhm/bravo.rar?dl=0
     
  2. cadfan

    cadfan Moderator Staff Member

    Tried the same too without succes i think in some librarys are hidden infos integrated they are not displayed with editors but you can print them out . DDG Caml. is y oriented can be edited in z than everything is ok caml scanbod.with ddg interface but in the cad comes this wonderful pink. If you look in the original xmls theirs only 30 % visible in the editor versus print version . If you try it with a simple rescanned body stl you loose orientation versus correlation to the interface.
     
  3. cadfan

    cadfan Moderator Staff Member

    Tried to print i see only the warranty disclaimer the rest is lost thats our problem i think
     
    Rune likes this.
  4. Rune

    Rune The force is strong

    Strange... Can't figure out what goes wrong. Tried y-oriented, same thing.
    Looks like unsigned lib's won't work on newer versins of exo.
    @Till Please enlighten us:)
    Looking in my files for an unsigned lib to compare....
     
  5. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    The libraries I made still work in 5675.
    Did you use an existing implant library XML to start with?
     
  6. Rune

    Rune The force is strong

    Tested both.
    When looking into the xml's all files have a checksum stl's nd sdfa's
    If i make a box as a scanbody and inserts into any lib, the pink happens.
    I know i had a working unsigned library nagging me about it every time i opened it, but i cant find it.
    I have tried making my own lib from parts of other libs, and again : pink happens
    I have tried 3 different euro implanteditors... pink happens
    @Till propably have a solution.
    Will have to reverse engeneer the checksums exocad makes. Propably not md5 level or public key:)
     
  7. cadfan

    cadfan Moderator Staff Member

    No just different parts from different lib. but base xml is new but their are non displayed xml parts tried different editors but not shown for editing.
     
  8. French Cadman

    French Cadman Administrator Staff Member

    Hello !

    I think you must have the same ending on all of your files ...
    For example I add "by FC" at the end of each file , connexion file and scanabutment file , and now ........

    It's OK ! rocking




    [​IMG]


    GO Rune ! GO ! :)

    [​IMG]
     
    Rigant, 2thm8kr, cadfan and 1 other person like this.
  9. Rune

    Rune The force is strong

    That sounds crazy! I will try asap. Can you share this homemade lib?(config)
    when i do the same, my config file looks different:confused:
     
  10. French Cadman

    French Cadman Administrator Staff Member

    May be with rune it' will be better .... :D
    Just add on your xml !

    Moment, I put on dropbox ...




    [​IMG]
     
  11. French Cadman

    French Cadman Administrator Staff Member

  12. French Cadman

    French Cadman Administrator Staff Member

    Change the end of the file name on your stl files and inside your xml as I do ......
     
  13. Rune

    Rune The force is strong

    Most stupid thing i ever encountered!!!
    I have been fighting this all day, and now it works.
    Thanks! Thanks @French Cadman.
    Learned a lot underway. File signatures seem to be Base-64, propably sha-512 And they'r maby salted.
     
    DMC, Rigant, texocad and 2 others like this.
  14. French Cadman

    French Cadman Administrator Staff Member

  15. Rune

    Rune The force is strong

    ICEcad, James, texocad and 1 other person like this.
  16. eliko

    eliko Member

    Hi!
    Where can I download Exo Implant Editor?
     
  17. adipas

    adipas Active Member

  18. eliko

    eliko Member

    Thank you so much.
    I have already downloaded the file there, but I can not run it. Perhaps the damaged file.
     
  19. Andrey

    Andrey Well-Known Member

    That the program was started you have to have a working key for exocad.
     
  20. adipas

    adipas Active Member

    this mesage?

    Untitleed.png
     

Share This Page