link exocad with scaner map 400

Discussion in 'exocad' started by fido69, Mar 19, 2019.

  1. fido69

    fido69 New Member

    Hello, I have exocad matera and I would like to scan with the exoscan, how can I link the Amann Girrbach map scaler 400+ with the exocad.
     
  2. juldan juan

    juldan juan New Member

    Hi, you can’t
    You must add map400 reference in dentaldb config file
     
  3. fido69

    fido69 New Member

    how can I do it? How can I add the reference? how is it done ?, help please
     
  4. DMC

    DMC Scott Hudson

    I think this is a module.

    Similar to adding Steinbichler scanner to exocad.

    exoscan is always a module you need reseller to download and add to your system.

    Medit, DOF, Steinbochler all require exoscan module to be added specifically to your dongle license.

    I am sure same thing with your request.
     
  5. juldan juan

    juldan juan New Member

    Send pm
     
  6. bigbrush

    bigbrush Well-Known Member

    Scansoftware for SmartOptic scanners is standalone. Only Path in exo-db/ config.
    Look here: Scanpath.png .
    You need scansoftware by smartoptics!
     
    DMC and cadfan like this.
  7. DMC

    DMC Scott Hudson

    Yeah, I did not see this scanner supported by exoscan when I looked on exocad.com

    No SmartOptic listed for exoscan.
     
  8. bigbrush

    bigbrush Well-Known Member

    It is not supported, is standalone with integration, means orientation in exocoordinates.
     
  9. juldan juan

    juldan juan New Member

    You must have map400 scanner software.
    Also serial number...
    There’s a new release.
    But I think they don’t have it available online.
     
  10. mill3d

    mill3d Well-Known Member

    I talked with Amann Girrbach at IDS and I was told you don´t have to buy anything else with the scanner to get it work with unbranded exocad, so speak with your reseller. I am thinking of buying the scanner myself as DOF has sh*tty scan app.
     

Share This Page